exprorecorders.uk

New Mono Leads For NAGRA III, IV.L D, E, 4.2. IS, & SN Tape Recorders

 Leads can be made up to order and are normally 1.5 meters long. Supplied by Mike Sound Services

Items For Sale

...We courier worldwide. Click on each image for more item details where provided.

NML1

Mono NAGRA Balanced Line Output Lead
For NAGRA model: - III, 4.L, 4.2, E, D, IS
NAGRA balanced line output 600 ohm 3pin XLR lead for NAGRA mono reel to reel tape recorder
3 banana plugs to mono 3pin XLR plugs
The 3 x banana plugs: Red & green to the transformer output for a balanced fully floating output. Black is common screen & plugs into screen of the line input
To use as a mono unbalanced output just plug the green into the black and connect to the transformer output
£35

NML1A

Mono NAGRA Line Input Lead
For NAGRA model: - 4.L, 4.2, E, D
3pin XLR line input lead for reel to reel tape recorder
6-pin tuchel plug to mono 3pin XLR socket
This lead has a 6-pin tuchel plug that plugs into the acc socket. It has a minimum source impedance of 47k, so it has a 47k fitted in the plug. The line input control on the NAGRA will adjust the input level to the recorder
1.5 m lead that can be up to 3 m
£35

NML2

NAGRA SLO Synchronize Leads
For NAGRA model: - III reel to reel tape recorder
To SLO synchronize leads
Original pilot and SLO leads
£65 - SOLD

NML3

NAGRA QGB Lead
For NAGRA model: - 4 or IV.S reel to reel tape recorder
To QGB 10 inch spool adapter
6 pin binder plugs to 6 pin binder plug
The atn power supply plugs into the QGB and this lead connects from the qgb back to the NAGRA power socket
£40

NML3A

NAGRA III to BM11 Mixer Lead or NAGRA 4 to BMT-3 Mixer Lead
For NAGRA model: - III or 4 reel to reel tape recorder
6 pin binder plugs to 6 pin binder plugs
This lead from the mixer plug into a NAGRA 3 power socket and the power supply lead plugs into the bm11 mixer
Lead will work in a NAGRA 4 plugged into the acc socket. However the inputs will be out of phase with the NAGRA microphone inputs. Unless the mixer has an internal mod to work with the NAGRA 4. Alternatively use the NAGRA QCB item UA69 in Accessories if mixer is not modified for a NAGRA 4
£40

NML4

NAGRA III Headphone Output Stereo Adapter Lead
For NAGRA model: - III reel to reel tape recorder
2 way banana plugs to stereo 3.5 mm jack socket
Stereo headphone will be mono in each ear. The banana adapter is a piggy back type, so a banana off tape output lead, can be plugged into the back
Supplied for stereo headphones
£28

NML4A

NAGRA III Headphone Output Mono Adapter Lead
For NAGRA model: - III reel to reel tape recorder
2 way banana plugs to stereo or mono 1/4"jack socket
Stereo headphone will be mono to each ear. The banana adapter is a piggy back type, so a banana off tape output lead, can be plugged into the back
Supplied for stereo or mono headphones
£28

NML5

Mono NAGRA Line Input or Output Lead
For NAGRA model: - 4l 4.2 or IS on reel-to-reel tape recorder
The red banana plug will plug into the side of the other red banana plug and the black into the black
You can record from stereo equipment with the 2 RCA phono and mono, the banana plug, into the recorder. Or playback from the mono banana output to 2 rca phono plugs into 2 channels of a stereo input
You will hear mono on both speakers
2 x RCA phono plugs to 2 sets of banana plugs, 1.5m lead
£35

NML5A

Mono NAGRA Line Input or Output Lead
For NAGRA model: - III, 4.l, 4.2, IS & E reel to reel recorder
Banana plug to banana plugs
£30

NML6

Mono NAGRA Input & Output Lead
For NAGRA model: - III, IV-l, 4.2, E or I.S reel-to-reel tape recorder
RCA phono plug to banana plugs, 1.5 m lead
The NAGRA banana line output is 4.4 volts and is to high for some inputs
However you can use lead ref: NML14
£25

NML7

NAGRA SN / SNS Output lead
For NAGRA model: - SN Mini mono reel-to-reel tape recorder
Mono 3.5 jack to banana plugs to use from SN to NAGRA III, 4, E or IS
Mono lead that is 3.5 mono jack two banana plug, with the C and R in the jack plug. Needed to mach to the headphones or line outputs and block the dc volts
£35

NML8 & NML8A (With 1/4 Jack Socket)

NAGRA SN / SNS Output Lead
For NAGRA model: - SN Mini mono reel-to-reel tape recorder
Mono 3.5 jack to stereo 3.5 jack socket, to use with stereo headphones
Mono lead that is 3.5 mono jack to 3.5 stereo jack socket with the C in the socket and R in the plug. Needed to mach to the headphones and block the dc volts
For headphone boster amp see USN8 in Accessories SN
£35

NML8B

NAGRA SN / SNS Output to M-Audio Headphone Amp Lead
For NAGRA model: - SN Mini mono reel-to-reel tape recorder
The SN recorder is low level output when used with headphones because it is designed to be used on a lPS docking station, when transferring to other mediums
This lead, which is 3.5 mono jack to 3.5 stereo jack plug with the C & R in the grey plug. Is needed to mach to the headphones amp and block the dc volts
The M-Audio headphone amp will not work on an SN without this lead
For headphone booster amp see USN8 in Accessories SN
£35

NML9

NAGRA SN/ SN-N/ SNS Output Lead
For NAGRA model: - SN Mini mono reel-to-reel tape recorder
Mono lead that is 3.5 mono jack to 3pin XLR plug, with the C to block the dc volts & R in the XLR. Needed to mach to the inputs, as used in the SN SCU adapter lead
£30

NML10

NAGRA SN/ SN-N / SNS Output
For NAGRA model: - SN Mini mono reel-to-reel tape recorder
Mono lead that is 3.5 mono jack to RCA phone plug, with the C in the RCA and R in the jack plug. The C & R is needed to mach to most inputs, as used in the SN SCU adapter lead
£33

NML11

NAGRA SN / SN-N SNS Output Lead
For NAGRA model: - SN Mini mono reel-to-reel tape recorder
Can be connected for the SN/ST output if requested
Mono 3.5 jack to 2 RCA phono plugs. The RCA phono plugs are mono outputs to connect to a stereo unit and produce mono in both channels
This lead has C and R in the 3.5 jack plug. Needed to mach to the inputs and block dc volts, as used in the SN SCU adapter lead
£30

NML12 & NML12A (For 1/4 Jack)

Mono NAGRA Output Lead
For NAGRA model: - IV-L, 4.2 recorder
It will give you a 560 mv output, instead of a banana plug output of 4.4 volt
7-pin tuchel plug to 3.5 stereo jack plug, 1.2 m lead. this lead can be to a 1/4 jack
Plug this lead into the NAGRA mixer socket, it will give you off tape mono output in to a stereo 3.5 jack plug line input
Output impedance of 100k at 560mv
£25

NML13 & NML13A (For 1/4 Jack)

Mono NAGRA Input Lead
For NAGRA model: - IV-L, 4.2 recorder
It will give you a 560 mv mono input from a stereo jack output
6-pin tuchel plug to 3.5 stereo jack plug, 1.2 m lead. This lead can be to a 1/4 jack
Plug this lead into the NAGRA mixer socket, it will give you mono line input from a stereo 3.5 jack plug
Input impedance of 9k at 560mv
£25

NOTE: The NAGRA E has a 6 pin input socket. If you are ordering leads please inform us if it is for an NAGRA E

Most of the 7 pin input leads can be fitted with a 6 pin plug, for the NAGRA E, this input is 40 db lower level than the banana plugs line input. The banana plugs output is balanced, you can use nml1 or nml18 or similar 3 x banana plug lead. However if you are connecting to an unbalanced input, just use the red into HI and black plug into LO. You do not need the green. Or you can use a 2 banana plug lead
You can use the 3 pin XLR as a line input. Just switch the microphone input to symmetrical line input

NML14

Mono NAGRA Input & Output Lead
For NAGRA model: - IV-L, 4.2 reel-to-reel tape recorder
7 pin binder plug to 2 RCA phono plugs, 1.5 m lead
Red phono is input and black phono is playback output. Plug the 7 pin binder plug into the NAGRA mixer socket
£30

NML15

2 Way Mono Output Lead
For NAGRA model: - 4 reel-to-reel tape recorder
This lead is connected for 2 mono output from a NAGRA 4 and will give you playback output from tape at 560 mv from the mixer socket. If you are connecting to stereo equipment it will give you mono on both channels
7 pin binder plug to 2 RCA phono plugs, 1.5 m lead
Please Note:- It is playback only. You will not get the direct output
£30

NML16

2 Way Mono Input Lead
For NAGRA model: - 4L or 4.2 reel-to-reel tape recorder
This lead is connected so a stereo output will be mono into a NAGRA 4l or 4.2. It will give you line input of 560 mv into the acc socket, if you are connecting to stereo equipment. It will give you mono on both channels
6 pin binder plug to 2 RCA phono plugs, 1.5 m lead
£30

NML17 & NML17A & NML17B

(NML17) Mono NAGRA Line In & Out Lead
Red jack is input and the white jack is playback 7 pin output
(NML17A) 2 x Mono NAGRA Line Input Lead
6 pin acc socket line input to combined left and right stereo to mono
(NML17B) 2 x Mono NAGRA Playback Output Lead
7-pin mixer socket output. This lead will give you mono onto the left and right tracks
£30

NML18

Mono NAGRA Balanced Output Lead
Red and green to transformer output, black to NAGRA screen case
Banana plugs to 1/4 stereo jack plug, 1.5 m lead. This lead can be made to a 3.5 jack plug
Can be used to transfer recording to Ipad or computer
Also used as a stereo NAGRA output for IV-S or IV-SJ
Output up to 4.4 volt
£26

NML19

Mono NAGRA Input & Output Lead
For NAGRA model: - III, IV-L, 4.2, E, or I.S reel-to-reel tape recorder
1/4 jake plug to banana plugs. 1.5 m lead
The NAGRA banana line output is 4.4 volts and is to high for some inputs
However you can use lead ref: NML17 on a NAGRA 4 or the headphone output on a NAGRA III
£25

NML20

Mono NAGRA Output Lead
For NAGRA model: - III, IV-L, 4.2, E or I.S reel-to-reel tape recorder
XLR 3-pin plug to banana plugs. 1.5 m lead
The NAGRA banana line output is 4.4 volts and is to high for some inputs
£25

NML21

Mono NAGRA Input Lead
For NAGRA model: - III, IV-L, 4.2, E or I.S reel-to-reel tape recorder
XLR 3-pin socket to banana plugs
1.5 m lead
£25

NM#

New Item
Will appear Here
When Added
Check back regularly for updates
on new items
£PRICE

 Remember to include the item ref when contacting Mike Harris Sound Services. You will be sent a quote.
If you proceed with the sale an invoice is provided with ways to pay.
A tracking number will be sent as proof of posting.